SW1 L4-1.9L SOHC VIN 8 (1996)
Fuel Injector Retainer And O-ring
13. Remove clips retaining the fuel injectors and pull injectors out of the rail.
14. Disassemble the injector 0-ring seals using a special seal removal tool or brass seal pick from each injector and discard.
NOTE: When cleaning or servicing the fuel rail, care must be taken to assure that the plastic fuel rail surfaces that mate to the injector 0-rings
are not scratched.
Areas Of Possible Contact
15. Lubricate the new 0-ring seals with clean engine oil and install injectors into fuel rail.
INSTALLATION
NOTE: Lubricate 0-rings at injector tips prior to installing injectors into intake manifold.
1. To install fuel rail assembly to intake manifold:
a. With injectors pointing upward, lower the fuel rail into the cavity between the cam cover and intake manifold.
b. Move rail towards power steering pump.
c. Rotate the injectors into a horizontal position. The fuel rail must be placed against the intake manifold runners to accomplish this.