SW1 L4-1.9L SOHC VIN 8 (1996)
6.
Install new rear stabilizer shaft link to the rear suspension stabilizer bar and the rear stabilizer shaft bracket.
7.
Install two new nuts to rear stabilizer shaft link. (Two new nuts are included in the rear stabilizer shaft link kit [P/N 21011129]).
Torque: 40 Nm (30 ft-lbs)
IMPORTANT:
Before installing wheels, remove rust or corrosion from wheel mounting surfaces and brake rotors/drums. Failure to do so can cause wheel nuts to
loosen in service.
8.
Position road wheel to vehicle.
9.
Install road wheel nuts and tighten in a crisscross pattern. Repeat tightening pattern to be sure torque is correct.
Torque: 140 Nm (103 ft-lbs)
PARTS REQUIREMENTS:
21011129
Link Kit-RR Stab Shf
CLAIM INFORMATION:
To receive credit for this repair during the warranty coverage period, submit a claim through the Saturn Dealer System as shown.
