SW2 L4-1.9L DOHC VIN 7 (1997)
![background image](/saturn/sw2/l4-1.9l_dohc_vin_7/Page-652004.png)
7. Disconnect the following vacuum hoses:
a. EVAP canister purge valve.
b. PCV hose at cam cover.
c. EGR valve.
d. Fuel regulator.
e. Throttle body connector.
f.
Vacuum brake booster hose at brake booster.
NOTE: The MAP sensor does not require removal.
8. Disconnect the following hoses:
a. Upper radiator hose at cylinder head outlet.
b. Deaeration hose at intake manifold.
c. Heater hose at intake manifold or front of dash.
NOTE: Use service tool SA911E (Snap-on Tool HPC10 or equivalent) to remove hose clamps.
WARNING: Catch leaking fuel in a container whenever fittings are loosened or lines are disconnected.