SW2 L4-1.9L DOHC VIN 7 (1997)
9. Disconnect both fuel lines:
a. Fuel pressure can be bled in to an approved container using gauge bar kit SA9127E.
b. Remove attachment bolt that clamps fuel lines to the intake manifold support brace.
c. Disconnect the fuel supply and return line to the fuel rail.
d. Remove upper intake manifold support bracket bolt.
10. Unclip the lower splash shield attachments and place a 1 inch x 1 inch x 2 inch long bock of wood between the torque strut and cradle.
NOTE: Installation of the wood block prior to upper engine torque axis mount removal allows the mount to be easily installed without lifting or
jacking the powertrain.