SW2 L4-1.9L DOHC VIN 7 (1997)
11. Remove the three right-hand upper engine torque axis mount-to-front cover nuts and the two mount to midrail bracket nuts, allowing the
powertrain to rest on the block or wood.
12. Remove the accessory drive belt and tensioner. It is not necessary to remove the water pump pulley.
CAUTION: The accessory drive belt idler pulley must be removed to allow the front cover to be removed and replaced in the vehicle.
13. Remove camshaft cover assembly.
CAUTION: Cover camshaft area whenever repairs are not being performed to prevent foreign debris from entering engine. Inspect the 12 cam
cover silicone isolators for cracks. Replace the isolators if deterioration exists.
14. Remove the five power steering pump bracket attachment bolts (if equipped) and position the pump next to the right-hand front of dash panel,
away from the cylinder head and intake manifold.
NOTE: It is not necessary to remove the water pump pulley.