SW2 L4-1.9L DOHC VIN 7 (1997)
IMPORTANT: Make sure to tuck in all flaps.
IMPORTANT: Be sure upper trim panel is correctly seated on forward edge before installing upper trim panel.
6. Install upper trim panel into clips at base of windshield.
7. Lower panel making sure upper trim panel alignment tabs interlock with windshield garnish slot.
8. Push down at clip locations to secure.
9. Install and tighten screws.
-
Torque: 2.3 N.m (20 inch lbs.).
10. Install screw caps.
11. Install upper trim panel extensions by pushing down at clip and dual-lock locations
