saturn Workshop Repair Guides

Saturn Workshop Service and Repair Manuals

Trunk / Liftgate Weatherstrip > < Door Window Channel|Page 11177
Page 2
background image

2. Install the front door trim panel. Refer to Trim Panel Replacement - Side Rear Door  See: Doors, Hood and Trunk/Doors/Rear Door/Rear Door

Panel/Service and Repair

Rear Door Window Belt Outer Sealing Strip Replacement

Sealing Strip Replacement - Rear Door Window Belt Outer

Removal Procedure

1. Remove the belt seal retaining screw at the front edge of the door.
2. Remove the outer belt seal by lifting up on the seal starting at the rear and working forward.

Installation Procedure

1. Align the outer belt seal fastener location with the hole in the door structure and outer panel retaining tabs.
2. Starting at the rear of the belt seal, push the belt seal down onto the flange until fully seated.

Notice:  Refer to Fastener Notice   in Cautions and Notices.

3. Install the outer belt seal retaining screw.

Tighten the screw to 2 N.m (18 lb in).

Trunk / Liftgate Weatherstrip > < Door Window Channel|Page 11177