VUE AWD V6-3.5L VIN 4 (2004)
Hydraulic Control Assembly - Antilock Brakes: Service and Repair
Brake Pressure Modulator Valve (BPMV) Bracket Replacement
Brake Pressure Modulator Valve (BPMV) Bracket Replacement
Removal Procedure
1. Remove the transmission control module (TCM), if equipped, from the mounting bracket and position aside.
2. Turn the ignition switch to the OFF position.
3. Disconnect the electronic brake control module (EBCM) electrical connector.
4. Loosen the 2 insulator nuts on the brake pressure modulator valve (BPMV) assembly.
5. Carefully lift the brake modulator assembly just enough to clear the bracket, then support the assembly.
