VUE AWD V6-3.5L VIN 4 (2004)
Intake Manifold: Service and Repair
Intake Manifold Replacement
Intake Manifold Replacement
Removal Procedure
1. Remove the outlet resonator/duct assembly.
2. Remove the throttle body.
3. Disconnect the PCV hoses from the intake manifold.
4. Disconnect the brake booster hose from the intake manifold.
5. Remove the intake manifold top cover nuts and bolts.
6. Remove and discard the intake manifold top cover gasket.
7. Remove the IAT2 sensor.
8. Disconnect the PCV hose.
9. Remove the air outlet duct bracket.
10. Remove the intake manifold nuts and bolts.