VUE AWD V6-3.5L VIN 4 (2004)
1. Inspect the seals and replace if damaged using Kent Industries adhesive backed foam tape P/N 46485 (or equivalent).
2. Install the LH air outlet duct to the instrument panel retainer.
NOTE: Refer to Fastener Notice in Service Precautions.
3. Install the LH air outlet duct screws to the instrument panel retainer.
Tighten the screws to 1 N.m (9 lb in).
4. Remove the instrument panel upper trim panel.
Instrument Panel Vent - Upper Right
AIR OUTLET DUCT REPLACEMENT - INSTRUMENT PANEL (I/P) - UPPER RIGHT
REMOVAL PROCEDURE
