VUE AWD V6-3.5L VIN 4 (2004)
Negative: Service and Repair
Disconnect/Connect Procedure
BATTERY NEGATIVE CABLE DISCONNECT/CONNECT PROCEDURE
REMOVAL PROCEDURE
CAUTION: Refer to Battery Disconnect Caution in Service Precautions.
1. Record all of the customer's radio station presets.
2. Turn off all the lamps and accessories.
3. Make sure the ignition switch is in the OFF position.
4. Remove the battery ground (negative) cable and bolt from the battery.
INSTALLATION PROCEDURE
1. Install the battery ground (negative) cable and bolt to the battery.
NOTE: Refer to Fastener Notice in Service Precautions.
IMPORTANT: Clean any existing corrosion from the battery terminal bolt flange and the battery cable end.
Tighten the battery terminal bolt to 16 N.m (12 lb ft).
2. Program all of the customer's radio station presets and set the radio clock to the current time.
