VUE AWD V6-3.5L VIN 4 (2004)
Lightly coat the tail end (1), the two tabs (2), and the shaft of the ignition lock cylinder with GM Super Lube(R) with PTFE, P/N 12371287 for U.S.
(10953437 in Canada).
Lightly coat the entire outside case (1) of the ignition lock cylinder with GM Multi-Purpose Lubricant, P/N 89021668 for U.S. (89021674 in Canada).
The ignition key must be installed in the ignition lock cylinder before installing the cylinder into the housing.
Install the ignition lock cylinder assembly into the ignition cylinder case housing. Refer to Ignition Lock Cylinder Replacement in SI.
Connect the negative battery cable and install the battery cover.
Verify that the customer's condition is fixed.
Warranty Information
For vehicles repaired under warranty, use the table.
