VUE FWD L4-2.4L Hybrid (2007)
36. Disconnect the engine wiring harness electrical connectors (2, 4) from the generator starter.
37. Remove the generator control module 3-phase cable nuts at the generator control module.
38. Remove the 12-volt positive battery cable nut (5) from the generator control module.
39. Remove the 36-volt positive battery cable nut (2) from the generator control module.
40. Remove the 36-volt terminal block nuts (1) from the generator control module.
41. Lift up, remove, and reposition the 36-volt terminal block, secure the block out of the way. Discard the terminal block seal.