tC L4-2.4L (2AZ-FE) (2005)
a. Using a brush or sponge, apply Primer M to the exposed part of the vehicle body.
NOTE:
-
Allow the Primer M to dry for 3 minutes or more.
-
Do not apply Primer M to the adhesive.
-
Throw away any leftover Primer M.
-
Do not apply too much Primer M.
b. Using a brush or sponge, apply Primer G to the contact surface of the back door glass.
HINT: If Primer G is applied to an area other than that which is specified, wipe off the primer with white gasoline before it dries.
NOTE:
-
Allow the Primer G to dry for 3 minutes or more.
-
Throw away any leftover Primer G.
-
Do not apply too much Primer G.
c. Apply adhesive to the back door glass.