tC L4-2.4L (2AZ-FE) (2005)
B.
Remove the 4 screws and the glass.
6.
Remove the sunshade trim sub-assembly.
A.
Remove the 2 nuts.
B.
Using a T25 Torx driver, remove the 4 screws.
C.
Slide the front side sunshade trim backward and remove it.
D.
Slide the rear side sunshade trim forward and remove it.
7.
Remove the sliding roof housing front mounting bracket by removing the 2 bolts, 2 nuts, and then the bracket.
8.
Remove the sliding roof housing center mounting bracket by removing the 2 bolts, 2 nuts, and then the bracket.