tC L4-2.4L (2AZ-FE) (2005)
/Page-1131001.png)
Trunk / Liftgate Shock / Support: Service and Repair
Replacement
BACK DOOR STAY
REPLACEMENT
HINT:
-
The installation procedures are the removal procedures in reverse order.
-
Use the same procedures for the RH side and LH side.
-
The procedures listed below are for the LH side.
1. REMOVE BACK DOOR STAY ASSEMBLY LH
a. Using a screwdriver, remove the 2 stop rings and stay.
HINT: Remove the door stay while supporting the back door with your hands.
2. INSTALL BACK DOOR STAY ASSEMBLY LH
a. Install the stay with the 2 stop rings.
