tC L4-2.4L (2AZ-FE) (2005)
Trunk / Liftgate Shock / Support: Service and Repair
Disposal
DISPOSAL
HINT: Use the same procedures for the LH side and RH side.
1. DISPOSE OF BACK DOOR STAY ASSEMBLY LH
a. Horizontally fix the stay in a vise with the piston-rod pulled out.
b. Using a metal saw, gradually cut any area between A and B to release the gas.
CAUTION: As metal debris may be blown outward by the gas, you must:
-
Wear protective glasses.
-
Cover the area being cut.
NOTE: The gas is colorless, odorless and harmless.