tC L4-2.4L (2AZ-FE) (2005)
8. Install and tighten the NEW washer and bolt in the order shown.
NOTE
Repeat procedure for opposite side.
HINT
You have done 3 bolt installations at this time.
Reassembly
1. Install the reclining adjuster inside cover RH (lower).
2. Install the reclining adjuster inside cover LH (lower).
3. Attach the airbag (if equipped) and cable routing clips to the reclining adjuster inside cover LH.
4. Install the seatback cover (with pad) over the seat frame.
5. Install the 2 NEW headrest supports.
With front seat side airbag: Fully cover the airbag with the 2 seatback cover brackets. Then attach the hook and tighten the nut.
Torque: 5 N*m (56 kgf*cm, 49 in*lbf)