tC L4-2.4L (2AZ-FE) (2005)
Required SSTs
Repair Procedure
1.
Disassemble the front skirt.
A.
The front skirt, repair parts, and work area must be at least 60°F (16°C).
B.
Clean the Ground Effects front skirt and surrounding front bumper cover with soap and water solution and wipe dry.
C.
Remove all of the fasteners in the inner LH & RH splash shields: seven (7) self-tapping screws, two (2) machine screws, and seven (7) push
pins (Figure 1).