tC L4-2.4L (2AZ-FE) (2005)
h. Remove the bolt and nut, then separate the engine mounting insulator FR from the engine mounting bracket FR.
i.
Remove the 4 bolts and 2 nuts, then remove the engine mounting insulator RH.
NOTICE: Do not apply excessive force to the return tube when removing the engine mounting insulator RH.
HINT: Keep clearance by lowering the engine using the transmission jack when removing the engine mounting insulator RH.
14. REMOVE IGNITION COIL ASSEMBLY
15. REMOVE CYLINDER HEAD COVER SUB-ASSEMBLY
a. Disconnect the 2 ventilation hoses from the cylinder head cover.
b. Disconnect the clamp of the engine wire.
c. Remove the bolt, then disconnect the engine wire.