tC L4-2.4L (2AZ-FE) (2005)
/Page-332010.png)
21. REMOVE CHAIN TENSIONER ASSEMBLY NO.1
a. Remove the bolt.
b. Disconnect the wire harness protector clamp.
c. Remove the 2 nuts, chain tensioner and gasket.
NOTICE: Do not turn the crankshaft without the chain tensioner.
22. REMOVE TIMING CHAIN OR BELT COVER SUB-ASSEMBLY
a. Using a Torx socket E10, remove the stud bolt for the V ribbed belt tensioner.
b. Remove the 14 bolts and 2 nuts.