tC L4-2.4L (2AZ-FE) (2005)
2. Using a deep socket wrench 22 mm, install the ventilation valve.
Torque: 19 N.m (194 kgf.cm, 14 ft.lbf)
5. CONNECT VENTILATION HOSE NO.2
a. Connect the ventilation hose No. 2 to the ventilation valve.
NOTE: Make sure that the paint mark and hose clamp are at the correct angle when installing.
6. CHECK FOR ENGINE OIL LEAKAGE
7. INSTALL ENGINE COVER SUB-ASSEMBLY NO.1