tC L4-2.4L (2AZ-FE) (2005)
Curtain Shield Air Bag Assy LH
REPLACEMENT
HINT:
-
Use the same procedures for the RH side and LH side.
-
The procedures listed below are for the LH side.
-
Installation is in the reverse order of removal.
1. PRECAUTION
Refer to Air Bag Systems; Service Precautions.
2. DISCONNECT BATTERY NEGATIVE TERMINAL
CAUTION: After removing the terminal, wait for at least 90 seconds before starting the operation.
3. REMOVE ROOF HEADLINING ASSEMBLY
4. REMOVE CURTAIN SHIELD AIR BAG ASSEMBLY LH
a. Disconnect the connector from the curtain shield airbag assembly LH.
NOTE: When handling the airbag connector, take care not to damage the airbag wire harness.