tC L4-2.4L (2AZ-FE) (2005)
CAUTION:
-
Never dispose of a curtain shield airbag assembly LH that has an undeployed airbag.
-
The airbag produces an exploding sound when it is deployed, so perform the operation outdoors and where it will not create a nuisance to nearby
residents.
-
When deploying the airbag, always use the specified SST (SRS Airbag Deployment Tool). Perform the operation in a place away from electrical
noise.
-
When deploying the airbag, perform the operation at least 10 m (33 ft) away from the curtain shield airbag assembly LH.
-
The curtain shield airbag assembly LH becomes extremely hot when the airbag is deployed, so do not touch it for at least 30 minutes after
deployment.
-
Use gloves and safety glasses when handling a curtain shield airbag assembly LH with a deployed airbag.
-
Do not apply water, etc. to a curtain shield airbag assembly LH with a deployed airbag.
-
Always wash your hands with water after completing the operation.
1. DISPOSE OF CURTAIN SHIELD AIR BAG ASSEMBLY LH (WHEN INSTALLED IN VEHICLE)
HINT: Prepare a battery as the power source to deploy the airbag.
a. Check the function of the SST.
SST 09082-00700
CAUTION: When deploying the airbag, always use the specified SST: SRS Airbag Deployment Tool.
1. Connect the SST to the battery.
Connect the red clip of the SST to the battery positive (+) terminal and the black clip of the SST to the battery negative (-) terminal.