tC L4-2.4L (2AZ-FE) (2005)
/Page-807003.png)
d. Install the 2 wire harness clamps.
e. Connect the generator wire with the nut.
Torque: 9.8 N.m (100 kgf.cm, 7 ft.lbf)
f.
Install the terminal cap.
g. Connect the generator connector.
6. INSTALL FAN AND GENERATOR V BELT
SST 09249-63010
7. INSTALL FRONT FENDER APRON SEAL RH
a. Install the front fender apron seal with the 3 clips and 2 screws.
8. CONNECT BATTERY NEGATIVE TERMINAL
Torque: 5.4 N.m (55 kgf.cm, 48 in.lbf)
