tC L4-2.4L (2AZ-FE) (2005)
Alternator: Service and Repair
Overhaul
OVERHAUL
1. REMOVE GENERATOR PULLEY
SST 09820-63011 (09820-06010), 09820-06021
a. Tighten SST 1-B to the specified torque, then fix SST 1-A on the generator rotor shaft.
Torque: 39 N.m (400 kgf.cm, 29 ft.lbf)
NOTE: Securely fix SST on the generator rotor shaft.
b. Clamp SST 2 in a vise.
c. Insert SST 1-A and B into SST 2, then fix the generator pulley nut into SST 2.
d. Turn SST 1-A in the direction shown, then loosen the generator pulley nut.
NOTE: If the generator pulley nut is turned by more than a half turn, the generator rotor shaft may be damaged.
e. Remove the generator from SST 2.