tC L4-2.4L (2AZ-FE) (2005)
4. DISCONNECT SPEED SENSOR FRONT LH
5. SEPARATE FRONT DISC BRAKE CALIPER ASSEMBLY LH
a. Removing the 2 bolts, separate the disc brake caliper assembly LH from the steering knuckle.
NOTICE:
-
Use a string or similar device to keep the brake caliper from hanging down by the flexible hose.
-
The friction surface of the pad and disc must be free from oil, grease and paint.
6. REMOVE FRONT DISC
NOTICE: There should be no oil or grease on the friction surface of the pad and disc.
7. SEPARATE TIE ROD END SUB-ASSEMBLY LH
SST 09628-00011
8. SEPARATE FRONT SUSPENSION ARM SUB-ASSEMBLY LOWER NO.1 LH
9. REMOVE FRONT AXLE ASSEMBLY LH
a. Using a plastic hammer, separate the drive shaft from the axle hub.
NOTICE: Be careful not to damage the boot and speed sensor rotor.
b. Remove the 2 bolts, 2 nuts and steering knuckle from the shock absorber.