tC L4-2.4L (2AZ-FE) (2005)
10. REMOVE LOWER BALL JOINT ASSEMBLY FRONT LH
a. Remove the cotter pin and nut.
b. Using SST, remove the ball joint.
SST 09628-62011
11. REMOVE FRONT AXLE HUB LH HOLE SNAP RING
a. Using snap ring pliers, remove the hole snap ring.
12. REMOVE FRONT AXLE HUB SUB-ASSEMBLY LH
a. Hold the steering knuckle lightly in a soft vise.
NOTICE: Do not overtighten the vise.
b. Using SST, remove the axle hub.
SST 09520-00031
c. Using SST, remove the bearing inner race (outside) from the axle hub sub-assembly.
SST 09950-40011 (09951-04020, 09952-04010, 09953-04030, 09954-04010, 09955-04061, 09957-04010, 09958-04010), 09950-60010
(09951-00370)
13. REMOVE DISC BRAKE DUST COVER FRONT LH
a. Remove the 3 bolts and disc brake dust cover front LH from the steering knuckle LH.
14. REMOVE FRONT AXLE HUB LH BEARING