tC L4-2.4L (2AZ-FE) (2005)
/Page-710003.png)
a. Using a 8 mm hexagon wrench and a hammer, remove the turn over bush.
13. REMOVE CLUTCH PEDAL SUB-ASSEMBLY
a. Remove the bolt and nut.
b. Remove the clutch pedal from the clutch pedal support.
14. REMOVE CLUTCH PEDAL PAD
15. REMOVE CLUTCH PEDAL BUSH
a. Remove the 2 bushes from the clutch pedal.
16. REMOVE CLUTCH PEDAL NO.1 CUSHION
a. Using needle-nose pliers, remove the 2 No.1 cushions from the clutch pedal.
17. REMOVE CLUTCH MASTER CYLINDER PUSH ROD CLEVIS BUSH
a. Using a 8 mm hexagon wrench and a hammer, remove the clevis bush from the clutch pedal.
