tC L4-2.4L (2AZ-FE) (2005)
18. INSTALL CLUTCH MASTER CYLINDER PUSH ROD CLEVIS BUSH
a. Apply MP grease to the inside of a new clevis bush.
b. Install the clevis bush to the clutch pedal.
HINT: Install the clevis bush from the right side of the vehicle.
19. INSTALL CLUTCH PEDAL NO.1 CUSHION
a. Using needle-nose pliers, install the 2 No.1 cushions to the clutch pedal.
20. INSTALL CLUTCH PEDAL BUSH
a. Apply MP grease to the inner, outer and end surfaces of 2 new bushes.
b. Install the 2 bushes to the clutch pedal.
21. INSTALL CLUTCH PEDAL PAD
22. INSTALL CLUTCH PEDAL SUB-ASSEMBLY
a. Install the clutch pedal to the clutch pedal support with the bolt and nut.
Torque: 37 Nm (375 kgf-cm, 27 ft. lbs.)
HINT: Install the bolt from the right side of the vehicle.