tC L4-2.4L (2AZ-FE) (2005)
Pressure Plate: Service and Repair
CLUTCH UNIT (MTM)
OVERHAUL
1. REMOVE MANUAL TRANSAXLE ASSEMBLY
2. REMOVE CLUTCH RELEASE FORK SUB-ASSEMBLY
a. Remove the clutch release fork with the clutch release bearing from the transaxle assembly.
3. REMOVE CLUTCH RELEASE BEARING ASSEMBLY
a. Remove the clutch release bearing assembly from the clutch release fork.
4. REMOVE RELEASE BEARING HUB CLIP
5. REMOVE CLUTCH RELEASE FORK BOOT
6. REMOVE RELEASE FORK SUPPORT
a. Remove the release fork support from the transaxle assembly.
7. REMOVE CLUTCH COVER ASSEMBLY