tC L4-2.4L (2AZ-FE) (2005)
/Page-716005.png)
18. INSTALL CLUTCH RELEASE BEARING ASSEMBLY
a. Apply clutch spline grease to the input shaft spline as shown in the illustration.
Sealant: Part No. 08887-01706, CLUTCH SPLINE GREASE or equivalent
b. Install the release fork with the release bearing assembly to the manual transaxle assembly.
NOTICE: After installation, move the fork back and forth to check that the release bearing slides smoothly.
19. INSTALL CLUTCH RELEASE FORK BOOT
20. INSTALL MANUAL TRANSAXLE ASSEMBLY
