tC L4-2.4L (2AZ-FE) (2005)
/Page-726001.png)
Flywheel: Specifications
Using several steps, uniformly install and tighten the 8 bolts in the sequence shown in the illustration.
Torque ......................................................................................................................................................................... 130 Nm (1,326 kgf-cm, 96 ft. lbs.)
Clutch cover assembly x Flywheel sub-assembly ................................................................................................................. 19 Nm (195 kgf-cm, 14 ft. lbs.)
Flywheel sub-assembly runout
Maximum ........................................................................................................................................................................................... 0.1 mm (0.004 inch)