tC L4-2.4L (2AZ-FE) (2005)
6. INSTALL BACK WINDOW GLASS ADHESIVE DAM KIT
a. Apply Primer G to the installation part of the back window glass adhesive dam kit.
HINT: If primer G is applied to an area other than that which is specified, wipe off the primer with white gasoline before it dries.
NOTE:
-
Allow the Primer G to dry for 3 minutes or more.
-
Throw away any leftover Primer G.
-
Do not apply too much Primer G.
b. Install the back window glass adhesive dam kit as shown in the illustration.