xA L4-1.5L (1NZ-FE) (2006)
/Page-1123001.png)
Condenser HVAC: Testing and Inspection
ON-VEHICLE INSPECTION
1. INSPECT CONDENSER WITH RECEIVER ASSEMBLY
a. If the fins of the condenser are dirty, clean them with water. Dry the fins with compressed air.
NOTE: Be careful not to damage the condenser.
b. If a fin of the condenser is bent, use a screwdriver or pliers to straighten it.
2. CHECK CONDENSER FOR LEAKAGE OF REFRIGERANT
a. Using a gas leak detector, check the pipe joints for gas leakage.
If gas leakage is detected in a joint, check the torque of the joint.
