xA L4-1.5L (1NZ-FE) (2006)
8. REMOVE HEATER SWITCH ASSEMBLY
a. Remove the 2 screws and heater switch.
INSTALLATION
1. INSTALL HEATER SWITCH ASSEMBLY
a. Install the heater switch with the 2 screws.
2. INSTALL AIR INLET DAMPER CONTROL LEVER
a. Attach the claw to install the air inlet damper control lever.
3. INSTALL HEATER CONTROL AND ACCESSORY ASSEMBLY
a. Connect the inner cable end of the air mix damper control cable on the heater control and accessory assembly.
b. Connect the outer cable of the air mix damper control cable on the cable clamp.
NOTE:
-
Be careful not to bend the cable wire.