xA L4-1.5L (1NZ-FE) (2006)
/Page-1160002.png)
a. Disconnect the rod in the order shown in the illustration.
b. Remove the 4 screws and blower motor cover.
5. REMOVE BLOWER WITH FAN MOTOR SUB-ASSEMBLY
a. Disconnect the connector.
b. Remove the 3 screws and blower motor.
6. REMOVE COOLER THERMISTOR
a. Detach the clamp and remove the cooler thermistor.
NOTE: Do not damage the packing when removing the thermistor.
