xA L4-1.5L (1NZ-FE) (2006)
c. Remove the 3 screws and evaporator cover.
d. Remove the cooler evaporator.
e. Remove the 2 O-rings from the cooler evaporator.
REASSEMBLY
1. INSTALL COOLER EVAPORATOR SUB-ASSEMBLY
a. Sufficiently apply compressor oil to the contact surfaces of 2 new O-rings and install them in the cooler evaporator.
Compressor oil: ND-OIL 8 or equivalent
b. Install the cooler evaporator on the blower unit.
c. Install the evaporator cover with the 3 screws.