xA L4-1.5L (1NZ-FE) (2006)
1. TEMPORARILY INSTALL FRONT SUSPENSION NO. 1 LOWER ARM SUB-ASSEMBLY LH
a. Temporarily install the front lower arm with the 2 bolts and nut.
2. CONNECT FRONT SUSPENSION CROSSMEMBER SUB-ASSEMBLY
a. Using SST, align the holes of the suspension member and the body.
SST 09670-00010
b. Perform the procedure above on the other side.
c. Install the suspension member with the 4 bolts.
Torque:
70 Nm (715 kgf-cm, 52 ft. lbs.) for bolt A
116 Nm (1,180 kgf-cm, 86 ft. lbs.) for bolt B
d. Install the bolt and 2 nuts.
Torque: 80 Nm (816 kgf-cm, 59 ft. lbs.)
3. INSTALL FRONT SUSPENSION MEMBER REINFORCEMENT LH
a. Install the reinforcement with the 2 bolts.
Torque: 47 Nm (480 kgf-cm, 35 ft. lbs.)
4. INSTALL FRONT SUSPENSION MEMBER REINFORCEMENT RH
a. Install the reinforcement with the 2 bolts.
Torque: 47 Nm (480 kgf-cm, 35 ft. lbs.)