xA L4-1.5L (1NZ-FE) (2006)
/Page-822002.png)
g. Disconnect the transmission control cable from the transmission control cable support.
8. CONNECT TRANSMISSION CONTROL CABLE ASSEMBLY
a. Temporarily install the transmission control cable on the control shaft lever with the nut.
b. Connect the transmission control cable on the bracket with a new clip.
c. Connect the transmission control cable to the transmission control cable support.
d. Install the transmission control cable on the body with the 3 bolts.
Torque: 5.0 Nm (51 kgf-cm, 44 inch lbs.)
