xA L4-1.5L (1NZ-FE) (2006)
/Page-822003.png)
e. Connect the transmission control cable on the shift lever plate.
f.
Temporarily install the transmission control cable on the floor shift.
Torque: 2 Nm (122 kgf-cm, 9 ft. lbs.)
9. INSTALL AIR CLEANER ASSEMBLY
a. Install the air cleaner.
10. INSTALL FRONT NO. 1 FLOOR HEAT INSULATOR
11. INSTALL FRONT EXHAUST PIPE ASSEMBLY
a. Install the front exhaust pipe.
12. ADJUST SHIFT LEVER POSITION
a. Adjust the shift lever position.
13. INSPECT SHIFT LEVER POSITION
a. Inspect the shift lever position.
14. INSTALL REAR CONSOLE BOX ASSEMBLY
a. Install the rear console box.
15. INSTALL CONSOLE BOX CARPET
16. INSTALL CONSOLE BOX REAR COVER
a. Install the console box rear cover.
