xA L4-1.5L (1NZ-FE) (2006)
4. INSTALL BACK DOOR GLASS
a. Using a brush or sponge, apply Primer M to the exposed part of the vehicle body.
NOTE:
-
Allow the primer to dry for 3 minutes or more.
-
Do not apply primer to the adhesive.
-
Throw away any leftover primer.
-
Do not apply too much primer.
b. Using a brush or sponge, apply Primer G to the contact surface of the back door glass.
HINT: If Primer G is applied to an area that is not specified, wipe off the primer with white gasoline before it dries.
NOTE:
-
Allow the primer to dry for 3 minutes or more.
-
Throw away any leftover primer.