xB L4-1.5L (1NZ-FE) (2004)
-
Allow the primer coating to dry for 3 minutes or more.
-
Do not coat the adhesive with Primer G.
-
Throw away any leftover Primer G.
e. Apply adhesive.
Adhesive: Part No. 08850-00801 or equivalent
1. Cut off the tip of the cartridge nozzle, as shown in the illustration.
HINT: After cutting off the tip, use all adhesive within the time described in the table.
2. Load the sealer gun with the cartridge.
3. Coat the glass with adhesive, as shown in the illustration.
f.
Install the glass.
1. Using a suction cup, position the glass so that the reference marks are aligned. Press it in gently along the rim.