xB L4-1.5L (1NZ-FE) (2004)
NOTE:
-
Allow the primer coating to dry for 3 minutes or more.
-
Check that the stoppers are attached to the vehicle body correctly.
-
Check the clearance between the vehicle body and glass.
2. Lightly press the front surface of the glass to ensure a close fit.
3. Using a scraper, remove any excess or protruding adhesive.
HINT: Apply adhesive onto the glass rim.
NOTE: Take care not to drive the vehicle for the time described in the table.
12. INSPECT FOR LEAKS AND REPAIR
a. Conduct a leak test after the adhesive has completely hardened.
b. Seal any leaks with auto glass sealer.