xB L4-2.4L (2AZ-FE) (2009)
(a) Measure the resistance according to the value(s) in the table below.
HINT: The resistance must be measured after the C48 CAN center junction connector is disconnected.
Standard Resistance:
NG -- CHECK CAN BUS LINES FOR SHORT CIRCUIT (MAIN BODY ECU BRANCH WIRE)
OK -- Continue to next step.
10. CHECK CAN BUS LINES FOR SHORT CIRCUIT (CAN CENTER J/C - CENTER AIRBAG SENOR ASSEMBLY)
(a) Measure the resistance according to the value(s) in the table below.
HINT: The resistance must be measured after the C48 CAN center junction connector is disconnected.
Standard Resistance:
NG -- CHECK CAN BUS LINES FOR SHORT CIRCUIT (CENTER AIRBAG SENSOR ASSEMBLY BRANCH WIRE)
OK -- Continue to next step.
11. CHECK CAN BUS LINES FOR SHORT CIRCUIT (CAN CENTER J/C - AIR CONDITIONING AMPLIFIER)