xB L4-2.4L (2AZ-FE) (2009)
![background image](/scion/xb/l4-2.4l_(2az-fe)/Page-818064.png)
(a) Measure the resistance according to the value(s) in the table below.
HINT: The resistance must be measured after the C48 CAN center junction connector is disconnected.
Standard Resistance:
NG -- CHECK CAN BUS LINES FOR SHORT CIRCUIT (AIR CONDITIONING AMPLIFIER BRANCH WIRE)
OK -- Continue to next step.
12. CHECK CAN BUS LINES FOR SHORT CIRCUIT (CAN CENTER J/C - POWER STEERING ECU)
(a) Measure the resistance according to the value(s) in the table below.
HINT: The resistance must be measured after the C48 CAN center junction connector is disconnected.
Standard Resistance:
NG -- CHECK CAN BUS LINES FOR SHORT CIRCUIT (POWER STEERING ECU BRANCH WIRE)
OK -- Continue to next step.
13. CHECK CAN BUS LINES FOR SHORT CIRCUIT (CAN CENTER J/C - STEERING SENSOR)