xB L4-2.4L (2AZ-FE) (2009)
(a) Disengage the 2 claws and remove the shoulder belt anchor cover.
14. REMOVE FRONT SHOULDER BELT ANCHOR ADJUSTER ASSEMBLY
(a) Remove the 2 bolts, the hook and the front shoulder belt anchor adjuster.
Installation
SEAT BELT: FRONT SEAT OUTER BELT ASSEMBLY: INSTALLATION
INSTALLATION
CAUTION: Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag
system before servicing See: Air Bag Systems/Service Precautions.
HINT: The procedure described below is for the RH side. Use the same procedure for both the RH and LH sides, unless otherwise specified.
1. INSTALL FRONT SHOULDER BELT ANCHOR ADJUSTER ASSEMBLY
(a) Insert the hook into the body hole and install the shoulder belt anchor adjuster with the 2 bolts.
Torque: 41 Nm (420 kgf-cm, 30 ft-lbf)
2. INSTALL SHOULDER BELT ANCHOR COVER
(a) Engage the 2 claws and install the shoulder belt anchor cover.
3. INSTALL CENTER PILLAR UPPER GARNISH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
4. INSTALL FRONT SEAT OUTER BELT ASSEMBLY RH (for Front Passenger Side)