xB L4-2.4L (2AZ-FE) (2009)
![background image](/scion/xb/l4-2.4l_(2az-fe)/Page-1110004.png)
(b) Connect the positive (+) battery lead to the solenoid connector terminal, and the negative (-) battery lead to the solenoid body, and check the
operation of the valve.
NOTICE: While using the battery during the inspection, do not bring the positive and negative tester probes too close to each other as a short
circuit may occur.
OK:
The solenoid makes an operating sound.
If the resistance is not as specified, replace the shift solenoid valve S4.