xB L4-2.4L (2AZ-FE) (2009)
Valve Body: Testing and Inspection
Valve Body Assembly
U241E AUTOMATIC TRANSAXLE: VALVE BODY ASSEMBLY: INSPECTION
INSPECTION
1. INSPECT SHIFT SOLENOID VALVE SL1
(a) Measure the resistance.
Standard resistance:
(b) Connect the positive (+) battery lead with a 21 W bulb to terminal 2 and the negative (-) battery lead to terminal 1 of the solenoid valve
connector, and check the operation of the valve.
NOTICE: While using the battery during the inspection, do not bring the positive and negative tester probes too close to each other as a short
circuit may occur.
OK:
The solenoid makes an operating sound.
If the resistance is not as specified, replace the shift solenoid valve SL1.
2. INSPECT SHIFT SOLENOID VALVE SL2