xB L4-2.4L (2AZ-FE) (2009)
![background image](/scion/xb/l4-2.4l_(2az-fe)/Page-1139004.png)
Removal
DRIVE SHAFT: FRONT DRIVE SHAFT ASSEMBLY: REMOVAL
REMOVAL
1. DRAIN AUTOMATIC TRANSAXLE FLUID (for Automatic Transaxle) See: Automatic Transmission/Transaxle/Service and Repair/Removal
and Replacement/Removal
2. DRAIN MANUAL TRANSAXLE OIL (for Manual Transaxle) See: Manual Transmission/Transaxle/Service and Repair/Removal and
Replacement/Removal
3. REMOVE FRONT WHEEL
4. REMOVE NO. 1 ENGINE UNDER COVER
5. REMOVE REAR ENGINE UNDER COVER LH
6. REMOVE REAR ENGINE UNDER COVER RH
7. REMOVE FRONT AXLE HUB NUT LH See: Wheel Hub/Service and Repair/Front Axle Hub/Removal
8. REMOVE FRONT AXLE HUB NUT RH
HINT: Use the same procedure as for the LH side.